Subaru IMPREZA 2002 Service Manual page 326

RELEASE BEARING AND LEVER
I
CLUTCH SYSTEM
3) Install the release lever seal.
(A) Release lever
(6) Release lever seal
4) Install the transmission assembly.
<Ref. to MT-30, INSTALLATION, Manual Tran
mission Assembly.>
2. TURBO MODEL
#) Install the release bearing on transmission.
2) Insert the release fork into release bearing tab.
S2M1937A
(A) Release fork
(6) Release bearing
3) Apply grease to the specified points:
Spline FX2200
Shaft SUNLIGHT 2
S2M1938A
(A) Spline (FX2200)
(6) Shaft (SUNLIGHT 2)
4) Insert the release fork shaft into release fork.
CAUTION:
Make sure the cutout portion of the release fork
shaft contacts spring pin.
1845A
(A) Release fork
(B) Release shaft
(C) Spring pin
5 ) Install the transmission assembly. <Ref. to MT-
30, INSTALLATION, Manual Transmission Assem-
bly.>
CL-16