I
ATF COOLER PIPE AND HOSE
AUTOMATIC TRANSMISSION
8) Fill ATF. <Ref. to AT-9, Automatic Transmission
C: INSPECTION
Fluid.>
NOTE:
Make sure there are no ATF leaks in joints between
the transmission, radiator, pipes, and hoses.
Repair or replace any defective hoses, pipes,
clamps, and washers found from the inspection be-
low.
1) Check for ATF leaks in joints between the trans-
mission, radiator, pipes, and hoses.
2) Check for deformed clamps.
3) Lightly bend the hose and check for cracks in the
surface and other damage.
4) Pinch the hose with your fingers and check for
poor elasticity. Also check for poor elasticity in the
parts where the clamp was installed by pressing
with your fingernail.
5 ) Check for peeling, cracks, and deformation at
the tip of the hose.
c-
.
AT-51