Subaru IMPREZA 2002 Service Manual page 69

I
IN H
I
B I T 0 R SWITCH
AUTOMATIC TRANSMISSION
C: REMOVAL
1) Set up the vehicle on the lift.
2) Move the select lever to neutral position.
3) Remove the air cleaner case. (Non-turbo model)
<Ref. to IN(S0HC)-6, REMOVAL, Air Cleaner
Case.>
4) Remove the intercooler. (Turbo model) <Ref. to
IN(D0HC TURBO)-1 0, REMOVAL, Intercooler.>
5) Disconnect the inhibitor switch connector.
c-
(A) Inhibitor switch
6) Remove the inhibitor switch connector from stay.
7) Lift-up the vehicle.
8) Remove the front exhaust pipe with center ex-
haust pipe. (Non-turbo model)
<Ref. to EX(S0HC)-5, REMOVAL, Front Exhaust
Pipe.>
9) Remove the center exhaust pipe. (Turbo model)
<Ref. to EX(D0HC TURBO)-8, REMOVAL, Center
Exhaust Pipe.>
10) Remove the snap pin from range select lever.
11) Remove the plate assembly from transmission
case.
(A) Select cable
(B) Plate ASSY
12) Remove the bolts.
(A) Inhibitor switch
13) Move the range select lever to parking position
(left side).
(A) Snap pin
(B) Select cable
(C) Range select lever
(A) Range select lever
AT-29