Differential Gear Oil - Subaru IMPREZA 2002 Service Manual

I
DIFFERENTIAL GEAR OIL
AUTOMATIC TRANSMISSION
3. Differential Gear Oil
A: INSPECTION
1) Park the vehicle on a level surface.
2) Remove the oil level gauge and wipe it clean.
3) Reinsert the level gauge all the way. Be sure that
the level gauge is correctly inserted and in the
proper orientation.
4) Remove it again and note the reading. If the dif-
ferential gear oil level is below the "L" line, add oil to
bring the level up to the "F' line.
5) To prevent overfilling the differential gear oil, do
not add oil above the 'IF line.
B: REPLACEMENT
1) Lift-up the vehicle.
2) Drain the differential gear oil completely.
CAUTION:
Directly after the engine has been running, the
differential gear oil i s hot. Be careful not to burn
yourself.
NOTE:
Tighten the differential gear oil drain plug after
draining the differential gear oil.
Tightening torque:
44 N.m (4.5 kgf-m, 32.5 ff-16)
c .
.
I
s
3 M 0
4 7 8 A
(A) Upper level
(B) Lower level
(A) Oil pan
(B) Drain plug
(C) Differential oil drain plug
3) Lower the vehicle.
4) Pour gear oil into the gauge hole.
Recommended fluid:
Gear oil capacity:
5) Check the level of the differential gear oil.
<Ref. to AT-1 1, INSPECTION, Differential Gear
Oil.>
Use GL-5 or equivalent.
1.2 8 (1.3 US qt, 1.1 Imp qt)
AT-I 1