Parameters; Overview - Siemens SINAMICS V90 Operating Instructions Manual

Parameters

10.1

Overview

Parameter number
Numbers prefixed with an "r" indicate that parameter is a read-only parameter.
Numbers prefixed with a "P" indicate that the parameter is an editable parameter.
Effective
Indicates the conditions for making parameterization effective. Two conditions are possible:
● IM (Immediately): Parameter value becomes effective immediately after changing.
● RE (Reset): Parameter value becomes effective after repower-on.
Can be changed
This indicates when the parameter can be changed. Two states are possible:
● U (Run): Can be changed in the "Running" state when the drive is in the servo on state.
The "RDY" LED lights up green.
● T (Ready to run): Can be changed in the "Ready" state when the drive is in the servo off
state. The "RDY" LED lights up red.
Note
When judging the state of the drive according to the "RDY" LED, ensure that no faults or
alarms exist.
Data type
Type
I16
I32
U16
U32
Uint16
Uint32
Float
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
Description
16-bit integer
32-bit integer
16 bits without sign
32 bits without sign
16-bit unsigned integer
32-bit unsigned integer
32-bit floating point number
10
253