Jog - Siemens SINAMICS V90 Operating Instructions Manual

Basic operator panel (BOP)
6.5 Auxiliary functions
6.5.1

Jog

Note
The digital signal EMGS must be kept at high level (1) to ensure normal operation.
With the Jog function, you can run the connected motor and view Jog speed or Jog torque.
To run the connected motor with the Jog function and view the Jog speed, proceed as
follows:
Jog in speed (example)
To run the connected motor with the Jog function and view the Jog torque, proceed as
follows:
Jog in torque (example)
NOTICE
Exit the Jog mode after completing Jog run.
The servo motor cannot run if the servo drive is in the Jog mode.
128
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0