Siemens SINAMICS V90 Operating Instructions Manual page 71

No. Name Type
10 TLIM1 Level
11 TLIM2 Level
12 CWE Level
13 CCWE Level
14 ZSCLAMP Level
15 SPD1 Level
16 SPD2 Level
17 SPD3 Level
18 TSET Level
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
Description
Torque limit selection.
A combination of TLIM1 and TLIM2 can select four
torque limit sources (one external torque limit, three
internal torque limits).
TLIM2 : TLIM1
0 : 0: internal torque limit 1
•
0 : 1: external torque limit (analog input 2)
•
1 : 0: internal torque limit 2
•
1 : 1: internal torque limit 3
•
Enable clockwise rotations.
1: Enable clockwise rotation, ramp up
•
0: Disable clockwise rotation, ramp down
•
Enable counter-clockwise rotations.
1: Enable counter-clockwise rotation, ramp down
•
0: Disable counter-clockwise rotation, ramp up
•
Zero speed clamps.
1 = when the motor speed setpoint is an analog
•
signal and lower than the threshold level (p29075),
the motor is clamped.
0 = no action
•
Select speed mode: fixed speed setpoint.
A combination of the signals SPD1, SPD2 and SPD3
can select eight speed setpoint sources (one external
speed setpoint, seven fixed speed setpoints).
SPD3 : SPD2 : SPD1
0 : 0 : 0: external analog speed setpoint
•
0 : 0 : 1: fixed speed setpoint 1
•
0 : 1 : 0: fixed speed setpoint 2
•
0 : 1 : 1: fixed speed setpoint 3
•
1 : 0 : 0: fixed speed setpoint 4
•
1 : 0 : 1: fixed speed setpoint 5
•
1 : 1 : 0: fixed speed setpoint 6
•
1 : 1 : 1: fixed speed setpoint 7
•
Torque setpoint selection.
This signal can select two torque setpoint sources
(one external torque setpoint, one fixed torque set-
point).
0: external torque setpoint (analog input 2)
•
1: fixed torque setpoint
•
Connecting
4.3 Control/Status interface - X8
Control mode
PTI IPos S
✓ ✓ ✓
X X ✓
X X ✓
X X ✓
X X ✓
X X X
T
X
✓
✓
X
X
✓
71