Siemens SINAMICS V90 Operating Instructions Manual page 285

Par. No. Name
r0032 Active power actual value smoothed
Description: Displays the smoothed actual value of the active power.
r0033 Torque utilization smoothed
Description: Displays the smoothed torque utilization as a percentage.
The torque utilization is obtained from the required smoothed torque in reference to the torque limit,
scaled using p2196.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque utilization is available smoothed (r0033) and unsmoothed.
For M_set total (r0079) > M_max offset, the following applies:
demanded torque = M_set total - M_max offset
•
actual torque limit = M_max upper effective - M_max offset
•
For M_set total (r0079) <= M_max offset (p1532), the following applies:
demanded torque = M_max offset - M_set total
•
actual torque limit = M_max offset - M_max lower effective
•
For the actual torque limit = 0, the following applies: r0033 = 100 %
For the actual torque limit < 0, the following applies: r0033 = 0 %
r0034 Motor utilization thermal
Description: Displays the motor utilization from motor temperature model 1 (I
r0037[0...19] Power unit temperatures
Description: Displays the temperatures in the power unit.
Index:
[0]: Inverter maximum value
•
[1]: Depletion layer maximum value
•
[2]: Rectifier maximum value
•
[3]: Air intake
•
[4]: Interior of power unit
•
[5]: Inverter 1
•
[6]: Inverter 2
•
[7]: Inverter 3
•
[8]: Inverter 4
•
[9]: Inverter 5
•
[10]: Inverter 6
•
[11]: Rectifier 1
•
[12]: Rectifier 2
•
[13]: Depletion layer 1
•
[14]: Depletion layer 2
•
[15]: Depletion layer 3
•
[16]: Depletion layer 4
•
[17]: Depletion layer 5
•
[18]: Depletion layer 6
•
[19]: Cooling unit liquid intake
•
Dependency: Refer to A01009
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
Parameters
10.2 Parameter list
Unit Data type
kW Float
% Float
% Float
t) or 3.
2
°C Float
285