Simatic S7-200 - Siemens SINAMICS V90 Operating Instructions Manual

4.3.5.2

SIMATIC S7-200

Pulse train input position control (PTI)
*
**
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
The resistor R3 (200 Ohm to 500 Ohm) is required only if the speed for searching the
zero position exceeds 300 rpm.
The resistor R (200 Ohm to 500 Ohm, recommended power ≥ 5 W ) is required only if
the PTI input frequency exceeds 100 KHz.
Connecting
4.3 Control/Status interface - X8
93