Siemens SINAMICS V90 Operating Instructions Manual page 19

Danger to life due to fire as a result of overheating caused by incorrect operation
When incorrectly operated and in the case of a fault, the motor can overheat resulting in fire
and smoke. This can result in severe injury or death. Further, excessively high
temperatures destroy motor components and result in increased failures as well as shorter
service lives of motors.
• Operate the motor according to the relevant specifications.
• Only operate the motors in conjunction with effective temperature monitoring.
• Immediately switch off the motor if excessively high temperatures occur.
Risk of injury due to touching hot surfaces
In operation, the motor can reach high temperatures, which can cause burns if touched.
• Mount the motor so that it is not accessible in operation.
When maintenance is required
• allow the motor to cool down before starting any work.
• Use the appropriate personnel protection equipment, e.g. gloves.
Delivery check
Note
Intact deliverables
Deliverables received must be intact. It's not permissible to put a damaged unit into use.
Transport and storage
NOTICE
Property loss
Notify Siemens service personnel immediately of any damage discovered after delivery. If
the equipment is put into storage, keep it in a dry, dust-free, and low-vibration environment.
The storage temperature ranges from -40 °C to +70 °C.
Otherwise you will suffer property loss.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
WARNING
CAUTION
Safety instructions
1.2 Additional safety instructions
19