Connection Examples With Plcs; Simatic S7-200 Smart - Siemens SINAMICS V90 Operating Instructions Manual

4.3.5

Connection examples with PLCs

This section gives examples of connections between the drive and the PLC. All of the
connection examples shown in this section are made based on factory default settings for
digital inputs/outputs. You can assign different digital inputs/outputs based on your actual
requirement.
4.3.5.1

SIMATIC S7-200 SMART

Pulse train input position control (PTI)
When connect to different axes, the outputs are different. The diagram below take the
connection with axis 0 as example.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
Connecting
4.3 Control/Status interface - X8
89