Siemens SINAMICS V90 Operating Instructions Manual page 119

Hide thumbs Also See for SINAMICS V90:
Table of Contents

Advertisement

Display
Example
Data
Func
Jog
Save
defu
dr--sd
sd--dr
Update
A OFF1
A OFF2
ABS
A.B.S.
r xxx
r -xxx
T x.x
T -x.x
DCxxx.x
Exxxxx
Con
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 07/2015, 6SL3298-0AV60-0BP0
Description
Read-only parameter group
Function group
Jog function
Save data in drive
Restore drive to default settings
Save data from drive to SD card
Upload data from SD card to drive
Update firmware
Adjust AI1 offset
Adjust AI2 offset
The zero position has not been set
The zero position has been set
Actual speed (positive direction)
Actual speed (negative direction)
Actual torque (positive direction)
Actual torque (negative direction)
Actual DC link voltage
Position following error
The communication between the
SINAMICS V-ASSISTANT and the
servo drive is established.
In this case, the BOP is protected
from any operations except clear-
ing alarms and acknowledging
faults.
Basic operator panel (BOP)
Remarks
Refer to "Read a parameter value
(Page 126)".
Refer to "Function overview (Page 127)".
Refer to "Jog (Page 128)".
Refer to "Save parameters in the servo drive
(Page 129)".
Refer to "Reset parameters to default values
(Page 129)".
Refer to "Copy parameters from the servo
drive to an SD card (Page 130)".
Refer to "Copy parameters from an SD card
to the servo drive (Page 131)".
Refer to "Update firmware (Page 131)".
Refer to "Adjust AI offset (Page 132)".
Refer to "Adjust AI offset (Page 132)".
Refer to "Set zero position (Page 134)".
Refer to "Set zero position (Page 134)".
6.1 BOP overview
119

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotics s-1fl6

Table of Contents