Tektronix MSO2024B Programmer's Manual page 384

Commands Listed in Alphabetical Order
Group
Syntax
Related Commands
Examples
WFMOutpre:PT_Fmt? (Query Only)
Group
Syntax
Related Commands
Examples
WFMOutpre:PT_Off? (Query Only)
Group
Syntax
2-368 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Waveform Transfer
WFMOutpre:NR_Pt?
CURVe, DATa, DATa:STARt, DATa:STOP, SAVe:WAVEform,
SAVe:WAVEform:FILEFormat,
might return
WFMOUTPRE:NR_PT?
there are 10000 data points to be sent.
Returns the point format for the outgoing waveform specified by the
command. Returned values are either ENV, which indicates envelope mode
format in which the data is returned as a series of min/max pairs, or Y, which
indicates normal waveform points. The query command will time out and an error
will be generated if the waveform specified by
Waveform Transfer
WFMOutpre:PT_Fmt?
CURVe, DATa:SOUrce
might return
WFMOUTPRE:PT_FMT?
the waveform data is a series of min-max pairs.
The set form of this command is ignored. The query form always returns a 0, if
the waveform specified by DATA:SOUrce is on or displayed. If the waveform
is not displayed, the query form generates an error and returns event code 2244.
This command is for compatibility with other Tektronix oscilloscopes.
Waveform Transfer
WFMOutpre:PT_Off?
WFMInpre:NR_Pt
:WFMOUTPRE:NR_PT 10000
DATa:SOUrce
:WFMOutpre:PT_Fmt ENV
indicating that
DATa:SOUrce
is not turned on.
indicating that