Tektronix MSO2024B Programmer's Manual page 223

MEASUrement:METHod
Group
Syntax
Related Commands
Arguments
Examples
MEASUrement:REFLevel? (Query Only)
Group
Syntax
Examples
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets or returns the method used to calculate the 0% and 100% reference level.
Measurement
MEASUrement:METHod {Auto|HIStogram|MINMax}
MEASUrement:METHod?
MEASUrement:REFLevel:PERCent:HIGH,
LOW, MEASUrement:REFLevel:PERCent:MID,
PERCent:MID2
selects the best method for each data set.
Auto
sets the high and low waveform levels statistically using a histogram
HIStogram
algorithm.
uses the highest and lowest values of the waveform record. This selection
MINMax
is best for examining waveforms with no large, flat portions of a common value,
such as sine waves and triangle waves.
MEASUREMENT:METHOD?
indicating that the reference levels are set to MIN and MAX.
Returns the current reference level parameters.
Measurement
MEASUrement:REFLevel?
MEASUREMENT:REFLEVEL?
level settings
:MEASUREMENT:REFLEVEL:METHOD
PERCENT;ABSOLUTE:HIGH 0.0000;LOW 0.0000;MID1 0.0000 ;MID2
0.0000;:MEASUREMENT:REFLEVEL:PERCENT:HIGH 90.0000;LOW
10.0000;MID1 50.0000 ;MID2 50.0000
Commands Listed in Alphabetical Order
MEASUrement:REFLevel:PERCent:
MEASUrement:REFLevel:
might return
:MEASUREMENT:METHOD MINMAX
might return these reference
2-207