Tektronix MSO2024B Programmer's Manual page 273

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue
Conditions
Group
Syntax
Arguments
Examples
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE
Conditions
Group
Syntax
Arguments
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:DATA:SIZE?
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:DATA:SIZE 1
the LIN data size is 1 byte.
Sets or returns the binary data string used for a LIN search if the search condition
is ID or IDANDDATA.
This command requires a DPO2AUTO application module.
Bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue?
is the binary data string for the search.
<QString>
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:DATA:VALUE?
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:DATA:VALUE "XXXXXXXX"
indicating that the data value is don't care.
Sets or returns the error type used for a LIN Search.
This command requires a DPO2AUTO application module.
Bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE
{SYNC|PARity|CHecksum}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE?
specifies a sync error type.
SYNC
specifies a parity error type.
PARity
specifies a checksum error type.
CHecksum
Commands Listed in Alphabetical Order
might return
indicating that
might return
2-257