Tektronix MSO2024B Programmer's Manual page 139

CURSor:XY:RECTangular:Y:DELta? (Query Only)
Group
Syntax
CURSor:XY:RECTangular:Y:POSITION<x>
Group
Syntax
Arguments
CURSor:XY:RECTangular:Y:UNIts? (Query Only)
Group
Syntax
CURVe
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Returns The cursor Y delta value in rectangular coordinates.
Cursor
CURSor:XY:RECTangular:Y:DELta?
Sets or returns the Y rectangular coordinate for cursor 1 or cursor 2. The cursor
is specified by x.
Cursor
CURSor:XY:RECTangular:Y:POSITION<x> <NR3>
CURSor:XY:RECTangular:Y:POSITION<x>?
is the coordinate in volts.
<NR3>
Returns the cursor Y rectangular units.
Cursor
CURSor:XY:RECTangular:Y:UNIts?
Transfers waveform data to and from the oscilloscope in binary or ASCII format.
Each waveform transferred includes a waveform preamble which contains the
data format, scale, and associated information.
For analog waveforms, the CURVe? query transfers data from the oscilloscope.
The data source is specified by the
data points are specified by the
The oscilloscope returns data from the last acquisition if the source is a channel
waveform that is being previewed. The data does not reflect the acquisition
Commands Listed in Alphabetical Order
DATa:SOUrce command. The first and last
DATa:STARt and DATa:STOP commands.
2-123