Tektronix MSO2024B Programmer's Manual page 89

BUS
Conditions
Group
Syntax
BUS:B<x>:CAN:BITRate
Conditions
Group
Syntax
Arguments
Returns
BUS:B<x>:CAN:PRObe
Conditions
Group
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets or returns the parameters for each bus. These parameters affect either the
Serial Trigger Setup or the Bus Display.
This command requires a DPO2AUTO, DPO2EMBD, or DPO2COMP application
module.
Bus
BUS
Sets or returns the bit rate for CAN bus <x>, where x is the bus number.
This command requires a DPO2AUTO application module.
Bus
BUS:B<x>:CAN:BITRate <NR1>
BUS:B<x>:CAN:BITRate?
sets the bit rate to the closest bit rate supported by the instrument.
<NR1>
The query always returns the numerical bit rate value.
Sets or returns the probing method to probe CAN bus <x>, where x is the bus
number.
This command requires a DPO2AUTO application module.
Bus
Commands Listed in Alphabetical Order
2-73