Tektronix MSO2024B Programmer's Manual page 159

DISplay:INTENSITy:GLITch
Group
Syntax
Related Commands
Arguments
Examples
DISplay:INTENSITy:GRAticule
Group
Syntax
Arguments
Examples
DISplay:INTENSITy:WAVEform
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets the intensity of the glitch capture background of the waveform display. The
intensity can be set from 5 to 100% in increments of 5%. The intensity of the glitch
capture background can only be adjusted when the glitch capture background is
displayed and FilterVu filtering is in use. Otherwise, the intensity is fixed.
Use DISplay:GLITch to turn the glitch capture background ON and OFF.
Use FILTERVu:FREQuency
frequency chosen is different than the oscilloscope's full bandwidth.
FilterVu
DISplay:INTENSITy:GLITch {<NR1>}
is the glitch intensity and ranges from 5 to 100 percent.
<NR1>
DISPLAY:INTENSITY:GLITCH ?
indicating that the glitch intensity is 5%.
5
Sets and returns the display graticule intensity settings.
Display
DISplay:INTENSITy:GRAticule <NR1>
DISplay:INTENSITy:GRAticule?
is the graticule intensity and ranges from 0 to 100 percent.
<NR1>
DISPLAY:INTENSITY:GRATICULE?
DISPLAY:INTEnsITY:GRATICULE 30
Sets and returns the display waveform intensity settings.
Commands Listed in Alphabetical Order
to enable filtering. Filtering is enabled if the
might return
DISPLAY:INTENSITY:GLITCH
might return
2-143