Tektronix MSO2024B Programmer's Manual page 304

Commands Listed in Alphabetical Order
SELect:REF<x>
Group
Syntax
Arguments
Examples
SET? (Query Only)
Group
Syntax
2-288 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Turns on and off the display of the reference waveform <x>. The <x > variable
represents the reference channel number. The query returns whether the channel
is on or off.
Vertical
SELect:REF<x> {ON|OFF|<NR1>}
SELect:REF<x>?
turns on the display of the specified waveform. This waveform also becomes
ON
the selected waveform.
turns off the display of the specified waveform.
OFF
= 0 turns off the display of the specified waveform; any other value turns
<NR1>
on the display of the specified waveform.
turns the channel 2 waveform display on, and selects reference
SELECT:REF2 ON
waveform 2.
might return
SELECT:REF2?
waveform 2 is being displayed.
Returns the commands that list the oscilloscope settings except for configuration
information for the calibration values, the
WFMOutpre? query. This query allows you to record or "learn" the current
oscilloscope settings. You can use these commands to return the oscilloscope to
the state it was in when you made the SET? query. The SET? query always returns
command headers, regardless of the setting of the
because the returned commands are intended to be sent back to the oscilloscope as
a command string. The VERBose
the returned headers should be abbreviated or full-length.
This command is identical to the
Miscellaneous
SET?
indicating that reference
:SELECT:REF2 1
WFMInpre?
HEADer
command can still be used to specify whether
*LRN? command.
query, and the
command. This is