Tektronix MSO2024B Programmer's Manual page 150

Commands Listed in Alphabetical Order
Syntax
Related Commands
Arguments
Examples
*DDT
Group
Syntax
Related Commands
Arguments
Examples
2-134 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
DATE <QString>
DATE?
TIME
is a date in the form "yyyy-mm-dd" where yyyy refers to a four-digit
<QString>
year number, mm refers to a two-digit month number from 01 to 12, and dd refers
to a two-digit day number in the month.
specifies that the date is set to January 24, 2006.
DATE "2006-01-24"
might return
DATE? :DATE 2006-01-24
January 24, 2006.
Allows you to specify a command or a list of commands that execute when the
oscilloscope receives a *TRG
Define Device Trigger (*DDT) is a special alias that the *TRG command uses.
Miscellaneous
*DDT {<Block>|<QString>}
*DDT?
ALIas, *TRG
is a complete sequence of program messages. The messages can contain
<Block>
only valid commands that must be separated by semicolons and must follow all
rules for concatenating commands. The sequence must be less than or equal to 80
characters. The format of this argument is always returned as a query.
is a complete sequence of program messages. The messages can
<QString>
contain only valid commands that must be separated by semicolons and must
follow all rules for concatenating commands. The sequence must be less than or
equal to 80 characters.
*DDT #OACQUIRE:STATE RUN
started each time a *TRG command is sent.
indicating that the current date is set to
command or the GET IEEE488.2 interface message.
specifies that the acquisition system will be