Tektronix MSO2024B Programmer's Manual page 293

SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce
Group
Syntax
Related Commands
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets or returns the width setting for a runt trigger search to determine where to
place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
specifies the minimum width, in seconds.
<NR3>
Sets or returns the clock slope setting for a setup/hold trigger search to determine
where to place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
specifies polarity as the clock falling edge.
FALL
specifies polarity as the clock rising edge.
RISe
Sets or returns the clock source setting for an setup/hold trigger search to
determine where to place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce
{CH1|CH2|CH3|CH4|MATH|REF}
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce
Commands Listed in Alphabetical Order
2-277