Tektronix MSO2024B Programmer's Manual page 143

Syntax
Returns
Examples
DATa:DESTination
Group
Syntax
Related Commands
Arguments
Examples
DATa:ENCdg
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
DATa:COMPosition:AVAILable?
for sample data.
COMPOSITE_YT
for envelope or peak-detect data.
COMPOSITE_ENV
for sample data.
SINGULAR_YT
DATA:COMPOSITION:AVAILABLE?
DATA:COMPOSITION:AVAILABLE COMPOSITE_YT
data type.
Sets or returns the reference memory location for storing waveform data
transferred into the oscilloscope by the
Waveform Transfer
DATa:DESTination REF<x>
DATa:DESTination?
CURVe
is the reference location where the waveform will be stored.
REF<x>
might return
DATA:DESTINATION?
that reference 2is the currently selected reference memory location for incoming
waveform data.
DATA:DESTINATION REF1
data be stored in reference 1.
Sets or returns the format of outgoing waveform data. This command
is equivalent to setting WFMOutpre:ENCdg, WFMOutpre:BN_Fmt,
andWFMInpre:FILTERFreq. Setting the DATa:ENGdg value causes the
corresponding WFMOutpre values to be updated and conversely.
NOTE.
This command and query does not apply to incoming waveform data.
Commands Listed in Alphabetical Order
might return
indicating that the waveform
CURVe command.
:DATA:DESTINATION REF2
indicates that incoming waveform
indicating
2-127