Tektronix MSO2024B Programmer's Manual page 302

Commands Listed in Alphabetical Order
Examples
SELect:CONTROl
Group
Syntax
Arguments
Returns
Examples
SELect:D<x>
Group
2-286 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
turns the channel 2 waveform display on, and selects channel 2.
SELECT:CH2 ON
might return
SELECT:CH1?
displayed.
Sets or returns the waveform that is the recipient of future channel-related
commands, for example, the cursor commands. The command form also performs
the equivalent of a SELect:CH<x>
and Bus variations of that command.
Vertical
SELect:CONTROl {CH<x>|MATH|BUS<x>}
SELect:CONTROl?
specifies a channel waveform as the waveform affected by the front-panel
CH<x>
controls. <x> is the channel number.
specifies the math waveform as the waveform that is affected by the
MATH
front-panel controls.
specifies a bus waveform as the waveform affected by the front-panel
BUS<x>
controls. <x> specifies the bus number.
if all the channels are turned off.
NONE
SELECT:CONTROL CH2
selected waveform to be the implied object of waveform commands.
might return
SELECT:CONTROL?
is the implied object of waveform commands.
Turns on the display of the digital channel <x> and resets the acquisition. <x > is
the channel number. The query returns whether the channel is on or off but does
not indicate whether it is the selected waveform.
Vertical
indicating that channel 1 is being
:SELECT:CH1 1
ON command, as well as the Math, Reference,
is ignored on input.
NONE
resets acquisition displays on channel 2, and causes the
:SELECT:CONTROL MATH
indicating that math