Tektronix MSO2024B Programmer's Manual page 99

BUS:B<x>:RS232C:DATABits
Conditions
Group
Syntax
Arguments
BUS:B<x>:RS232C:DELIMiter
Conditions
Group
Syntax
Arguments
BUS:B<x>:RS232C:DISplaymode
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets or returns the number of RS232 data bits for bus <x>, where x is the bus
number.
This command requires a DPO2COMP application module.
Bus
BUS:B<x>:RS232C:DATABits {7|8|9}
BUS:B<x>:RS232C:DATABits?
specifies seven bits in the RS232 data frame.
7
specifies eight bits in the RS232 data frame.
8
specifies nine bits in the RS232 data frame.
9
Sets or returns the RS232 delimiting value for a packet on bus <x>, where x
is the bus number.
This command requires a DPO2COMP application module.
Bus
BUS:B<x>:RS232C:DELIMiter {NULl|LF|CR|SPace|XFF}
BUS:B<x>:RS232C:DELIMiter?
specifies 0x00.
NULl
specifies 0x0A.
LF
specifies 0x0D.
CR
specifies 0xFF.
XFF
Sets or returns the display mode for the bus <x> display and event table, where x
is the bus number.
Commands Listed in Alphabetical Order
2-83