Tektronix MSO2024B Programmer's Manual page 279

Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
Group
Syntax
Arguments
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B1|B2}
SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
specifies the Bus 1 source.
B1
specifies the Bus 2 source.
B2
Sets or returns the slope for an edge trigger search to determine where to place a
mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL}
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
specifies a rising edge.
RISe
specifies a falling edge.
FALL
Sets or returns the source waveform for an edge trigger search to determine where
to place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
{CH1|CH2|CH3|CH4|MATH}
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
specifies one input channel as the edge source, where <x> is the channel
CH<x>
number.
specifies the math waveform as the search source.
MATH
Commands Listed in Alphabetical Order
2-263