Tektronix MSO2024B Programmer's Manual page 103

Group
Syntax
Arguments
BUS:B<x>:SPI:DATA{:IN|:MISO}:POLARity
Conditions
Group
Syntax
Arguments
BUS:B<x>:SPI:DATA{:IN|:MISO}:SOUrce
Conditions
Group
Syntax
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Bus
BUS:B<x>:SPI{:CLOCK|:SCLK}:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:SPI{:CLOCK|:SCLK}:SOUrce?
is the channel to use as the SPI SCLK source.
CH1-CH4
is the digital channel to use as the SPI SCLK source.
D0-D15
Sets or returns the SPI MISO polarity for bus <x>, where x is the bus number.
This command requires a DPO2EMBD application module.
Bus
BUS:B<x>:SPI:DATA{:IN|:MISO}:POLARity {LOW|HIGH}
BUS:B<x>:SPI:DATA{:IN|:MISO}:POLARity?
specifies an active low polarity.
LOW
specifies an active high polarity.
HIGH
Sets or returns the SPI MISO source for bus <x>, where x is the bus number.
This command requires a DPO2EMBD application module.
Bus
BUS:B<x>:SPI:DATA{:IN|:MISO}:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:SPI:DATA{:IN|:MISO}:SOUrce?
Commands Listed in Alphabetical Order
2-87