Tektronix MSO2024B Programmer's Manual page 266

Commands Listed in Alphabetical Order
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype
Conditions
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN{:IDentifier|:ADDRess}:MODe
Conditions
Group
Syntax
Arguments
2-250 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets or returns the CAN Frame Type to be used if the trigger search condition is
Frame Type.
SEARCH<x>
This command requires a DPO2AUTO application module.
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype
{DATA|REMote|ERRor|OVERLoad}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype?
specifies a data frame.
DATA
specifies a remote frame.
REMote
specifies an error frame.
ERRor
specifies an overload frame.
OVERLoad
Sets or returns the CAN addressing mode for a trigger search to a standard or
extended format.
SEARCH<x>
This command requires a DPO2AUTO application module.
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN{:IDentifier|:
ADDRess}:MODe {STandard|EXTended}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN{:IDentifier|:
ADDRess}:MODe?
specifies an 11-bit identifier field.
STandard
specifies a 29-bit identifier field.
EXTended
is the search number and
is the search number and
is the bus number.
B<x>
is the bus number.
B<x>