Tektronix MSO2024B Programmer's Manual page 291

SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity
Group
Syntax
Arguments
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
places a mark if the pulse width is more than the time set by the
MOREthan
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth
places a mark if the pulse width is equal to the time set by the
EQUal
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth
tolerance of ±5%.
places a mark if the pulse width is unequal to the time the time set by
UNEQual
the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth
tolerance of ±5%.
Sets or returns the pulse width setting for a pulse width trigger search to determine
where to place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth <NR3>
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth?
is the pulse width.
<NR3>
Sets or returns the polarity setting for a runt trigger search to determine where to
place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity
{EITher|NEGative|POSitive}
SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
places a mark when the rising edge crosses the low threshold and
POSitive
the falling edge re-crosses the low threshold without either edge ever crossing
the high threshold.
places a mark when the falling edge crosses the high threshold and
NEGative
the rising edge re-crosses the high threshold without either edge ever crossing
the low threshold.
places a mark on a runt of either polarity.
EITher
Commands Listed in Alphabetical Order
command.
command within a
command within a
2-275