Tektronix MSO2024B Programmer's Manual page 100

Commands Listed in Alphabetical Order
Conditions
Group
Syntax
Arguments
BUS:B<x>:RS232C:PARity
Conditions
Group
Syntax
Arguments
BUS:B<x>:RS232C:POLarity
Conditions
Group
2-84 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
This command requires a DPO2COMP application module.
Bus
BUS:B<x>:RS232C:DISplaymode {FRAme|PACKET}
BUS:B<x>:RS232C:DISplaymode?
displays each frame as a single entity.
FRAme
displays a group of frames terminated with a single frame defined by the
PACKET
BUS:B<x>:RS232C:DELImiter
Sets or returns the RS232C parity for bus <x>, where x is the bus number.
This command requires a DPO2COMP application module.
Bus
BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
BUS:B<x>:RS232C:PARity?
specifies no parity.
NONe
specifies even parity.
EVEN
specifies odd parity.
ODD
NOTE.
9 data bits (BUS:B<x>:DATABITS 9) does not support parity. Changing
the parity with the PI while using 9 data bits, has no effect.
Sets or returns the RS232C polarity for bus <x>, where x is the bus number.
This command requires a DPO2COMP application module.
Bus
command or the front panel.