Tektronix MSO2024B Programmer's Manual page 138

Commands Listed in Alphabetical Order
CURSor:XY:RATIO:UNIts? (Query Only)
Group
Syntax
CURSor:XY:RECTangular:X:DELta? (Query Only)
Group
Syntax
CURSor:XY:RECTangular:X:POSITION<x>
Group
Syntax
Arguments
CURSor:XY:RECTangular:X:UNIts? (Query Only)
Group
Syntax
2-122 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Returns the cursor X and cursor Y units for the ratio measurement.
Cursor
CURSor:XY:RATIO:UNIts?
Returns the cursor X delta value in rectangular coordinates.
Cursor
CURSor:XY:RECTangular:X:DELta?
Sets or returns the X rectangular coordinate for cursor 1 or cursor 2. Cursors are
specified by x and can be either 1 or 2.
Cursor
CURSor:XY:RECTangular:X:POSITION<x> <NR3>
CURSor:XY:RECTangular:X:POSITION<x>?
is the coordinate in volts.
<NR3>
Returns the cursor X rectangular units.
Cursor
CURSor:XY:RECTangular:X:UNIts?