Tektronix MSO2024B Programmer's Manual page 206

Commands Listed in Alphabetical Order
Examples
MEASUrement:IMMed:SOUrce2
Group
Syntax
Related Commands
Arguments
Examples
MEASUrement:IMMed:SOUrce<x>
2-190 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
MEASUREMENT:IMMED:SOURCE1 MATH1
specifies Math1 as the immediate measurement source.
MEASUREMENT:IMMED:SOURCE1?
:MEASUREMENT:IMMED:SOURCE1 CH3
immediate measurement source.
Sets or returns the source to measure "to" for phase or delay immediate
measurements.
NOTE. Source2 measurements only apply to phase and delay measurement types,
which require both a target (Source1) and reference (Source2) source.
Measurement
MEASUrement:IMMed:SOUrce2 {CH<x>|MATH<y>|REF<x>}
MEASUrement:IMMed:SOUrce2?
MEASUrement:IMMed:SOUrce1
is an input channel waveform, where x is the channel number.
CH<x>
is a math waveform. The y variable can be expressed as an integer of 1.
MATH<y>
is a reference waveform, where x is the reference channel number.
REF<X>
MEASUREMENT:IMMED:SOURCE2 REF2
location 2 as the delay "to" source when making delay measurements.
MEASUREMENT:IMMED:SOURCE2?
:MEASUREMENT:IMMED:SOURCE2 MATH1
immediate measurement source.
For SOURce1: Sets or returns the source for all single channel measurements. For
delay or phase measurements, sets or returns the waveform to measure "from".
might return
indicating that channel 3 is the
sets the waveform in reference memory
might return
indicating that Math1 is the