Tektronix MSO2024B Programmer's Manual page 275

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition
Conditions
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe
Conditions
Group
Syntax
Arguments
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets or returns the condition for a RS232 trigger search.
number and is the bus number.
B<x>
This command requires a DPO2COMP application module.
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition
{RXSTArt|RXDATA|RXENDPacket|RXPARity|TXSTArt|
TXDATA|TXENDPacket|TXPARity}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition?
specifies a search based on the RX Start Bit.
RXSTArt
specifies a search based on RX Data.
RXDATA
specifies a search based on the RX End of Packet condition.
RXENDPacket
specifies a search based on the RX parity.
RXPARIty
specifies a search base on the TX Start Bit.
TXSTArt
specifies a search based on TX Data.
TXDATA
specifies a search based on the TX End of Packet condition.
TXENDPacket
specifies a search based on the TX parity.
TXPARIty
Sets or returns the length of the data string for a RS232 trigger search if the trigger
condition is RX.
SEARCH<x>
This command requires a DPO2COMP application module.
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe?
is the length of the data string in Bytes.
<NR1>
Commands Listed in Alphabetical Order
is the search number and
is the search
SEARCH<x>
is the bus number.
B<x>
2-259