Tektronix MSO2024B Programmer's Manual page 256

Commands Listed in Alphabetical Order
SAVe:WAVEform:GATIng
Group
Syntax
Arguments
Examples
SAVe:WAVEform:SPREADSheet:RESOlution
Group
Syntax
Arguments
Examples
2-240 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Specifies whether save waveform operations should save the entire waveform
(NONe) or a specified portion of the waveform.
Save and Recall
SAVe:WAVEform:GATIng {NONe|CURSors|SCREEN}
SAVe:WAVEform:GATIng?
turns on cursors and the gates are the waveform record points at the
CURSors
cursor positions.
saves the entire waveform.
NONe
, if zoom is on, the gates are the start and end waveform record points of
SCREEN
the zoom (upper) graticule, otherwise the gates are the start and end waveform
record points of the main graticule.
SAVE:WAVEFORM:GATING CURSors
is set to cursors, save waveform operations should save the waveform points
between the cursors. If cursors are turned off, waveform gating automatically
reverts to NONE.
Specifies whether to save the full (LRL) or reduced (thumb) resolution waveform
to a CSV file.
Waveform Enhanced
SAVe:WAVEform:SPREADSheet:RESOlution {FULL|REDUced}
SAVe:WAVEform:SPREADSheet:RESOlution?
specifies that full resolution waveform is saved to a CSV file.
FULL
specifies that reduced resolution waveform is saved to a CSV file.
REDUced
SAVE:WAVEFORM:SPREADSHEET:RESOLUTION?
SAVE:WAVEFORM:SPREADSHEET:RESOLUTIONFULL
resolution waveform is saved to a CSV file.
specifies that, when the waveform gating
might return
indicating that full