Tektronix MSO2024B Programmer's Manual page 295

SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime
Group
Syntax
Arguments
SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
specifies the math waveform as the search source.
MATH
specifies the reference waveform as the search source.
REF
specifies the digital waveform as the search source.
D0–D15
Sets or returns the data threshold setting for an setup/hold trigger search to
determine where to place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold
{<NR3>|TTL|ECL}
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold?
specifies a preset
TTL TTL
specifies a preset
ECL ECL
is the clock level, in volts.
<NR3>
Sets or returns the hold time setting for an setup/hold trigger search to determine
where to place a mark. <x> is the search number.
Search
SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
specifies the hold time setting in seconds. Positive values for hold time
<NR3>
occur after the clock edge. Negative values occur before the clock edge.
Sets or returns the setup time setting for an setup/hold trigger search to determine
where to place a mark. <x> is the search number.
Commands Listed in Alphabetical Order
high level of 1.4 V.
high level of –1.3 V.
2-279