Tektronix MSO2024B Programmer's Manual page 351

Group
Syntax
Arguments
Examples
TRIGger:A:SETHold:DATa? (Query Only)
Group
Syntax
Related Commands
Examples
TRIGger:A:SETHold:DATa:SOUrce
Group
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Trigger
TRIGger:A:SETHold:CLOCk:THReshold {<NR3>|TTL|ECL}
TRIGger:A:SETHold:CLOCk:THReshold?
specifies a preset
TTL TTL
specifies a preset
ECL ECL
is the clock level, in volts.
<NR3>
TRIGGER:A:SETHOLD:CLOCK:THRESHOLD TTL
of 1.4 V as the clock threshold for the setup and hold trigger.
TRIGGER:A:SETHOLD:CLOCK:THRESHOLD?
:TRIGGER:A:LOGIC:SETHOLD:CLOCK:THRESHOLD 1.2000E+00
indicating that the clock threshold for the setup and hold trigger is 1.2 V.
Returns the voltage threshold and data source for the setup and hold trigger.
Trigger
TRIGger:A:SETHold:DATa?
TRIGger:A:SETHold:CLOCk?
TRIGGER:A:SETHOLD:DATA?
:TRIGGER:A:SETHOLD:DATA:SOURCE CH2;THRESHOLD 80.0000E-3
Sets or returns the data source for the setup and hold trigger. You cannot specify
the same source for both clock and data.
For DPO models, you can specify only a single data source. Data sources for
DPO models may be one of CH1–CH4 or D0–D15.
Trigger
Commands Listed in Alphabetical Order
high level of 1.4 V.
high level of –1.3 V.
specifies the preset TTL value
might return
might return
2-335