Tektronix MSO2024B Programmer's Manual page 237

PASSWord(No Query Form)
Group
Syntax
Related Commands
Arguments
Examples
PICTBridge:DATEPrint
Group
Syntax
Arguments
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
might return 1 to indicate that all pending OPC operations are finished.
*OPC?
Enables the *PUD and NEWpass set commands. Sending PASSWord without any
arguments disables these same commands. Once the password is successfully
entered, the *PUD and NEWpass commands are enabled until the oscilloscope
is powered off, or until the FACtory command or the PASSWord command with
no arguments is issued.
To change the password, you must first enter the valid password with the
PASSWord command and then change to your new password with the NEWpass
command. Remember that the password is case sensitive.
Miscellaneous
PASSWord <QString>
NEWpass, *PUD
is the password and can include up to 10 characters. The factory
<QString>
default password is "XYZZY" and is always valid.
enables the *PUD and NEWpass set commands.
PASSWORD "XYZZY"
disables the *PUD and NEWpass set commands. You can still use the
PASSWORD
query version of *PUD.
Enables or disables printing the date on the print output.
PictBridge
PICTBridge:DATEPrint {DEFLT|OFF|ON}
is the default setting of the printer.
DEFLT
enables the date print on the print output.
ON
disables the date print on the print output.
OFF
Commands Listed in Alphabetical Order
2-221