Tektronix MSO2024B Programmer's Manual page 125

Syntax
Related Commands
Arguments
Examples
CH<x>:TERmination
Group
Syntax
CH<x>:VOLts
Group
Syntax
Arguments
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
CH<x>:SCAle <NR3>
CH<x>:SCAle?
CH<x>:OFFSet, CH<x>:POSition, REF<x>:VERTical:SCAle,
MATH[1]:VERTical:SCAle
is the vertical channel scale in units-per-division. The value entered here
<NR3>
is truncated to three significant digits.
sets the channel 4 scale to 100 mV per division.
CH4:SCALE 100E-03
might return
CH2:SCALE?
setting of channel 2 is 1 V per division.
Sets the connected-disconnected status of a 50 Ω resistor, which may be connected
between the specified channel's coupled input and oscilloscope ground. The
channel is specified by <x>. There is also a corresponding query that requests the
termination parameter and translates this enumeration into one of the two float
values. This command is maintained for compatibility.
Vertical
CH<x>:TERmination
CH<x>:TERmination?
Sets or returns the vertical sensitivity for channel <x>, where x is the channel
number.
Vertical
CH<x>:VOLts <NR3>
CH<x>:VOLts?
is the vertical sensitivity, in volts.
<NR3>
Commands Listed in Alphabetical Order
indicating that the current scale
:CH2:SCALE 1.0000
2-109