Tektronix MSO2024B Programmer's Manual page 181

Related Commands
Arguments
Examples
HARDCopy:INKSaver
Group
Syntax
Arguments
Examples
HARDCopy:PREVIEW (No Query Form)
Group
Syntax
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
*WAI, *CLS
sends a block of data representing the current screen image to the requested
START
port. The data sent is in the image format specified by SAVe:IMAGe:FILEFormat,
and the compression level is controlled by whatever format has been selected
(BMP and TIFF are uncompressed, while PNG is compressed).
initiates a screen copy to the active printer.
HARDCOPY
Changes hard copy output to print traces and graticule on a white background
while retaining waveform color information (except for channel 1, which prints as
dark blue because yellow does not show up well and is difficult to see on a white
background). This option can significantly reduce print time and quantities of ink
required compared with WYSIWYG dark background images.
Hard Copy
HARDCopy:INKSaver?
or ≠ 0 sets the ink saver mode on.
ON <NR1>
or = 0 sets the ink saver mode off.
OFF <NR1>
HARDCOPY:INKSAVER ON
screen on a white background.
Displays a preview of the current screen contents with the InkSaver palette
applied.
Hard Copy
HARDCopy:PREVIEW {ON|OFF|<NR1>}
Commands Listed in Alphabetical Order
will cause subsequent hard copy output to display the
2-165