Management Host - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
March and the last field depends on your time zone. In Germany
for instance, you would select 2:00 because Germany's time zone
is one hour ahead of GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you
enabled Daylight Saving Time. The time field uses the 24 hour
format.
Here are a couple of examples:
Daylight Saving Time ends in the United States on the last Sunday
of October. Each time zone in the United States stops using
Daylight Saving Time at 2 A.M. local time. So in the United States
End Date
you would select First, Sunday, November and 2:00.
Daylight Saving Time ends in the European Union on the last
Sunday of October. All of the time zones in the European Union
stop using Daylight Saving Time at the same moment (1 A.M. GMT
or UTC). So in the European Union you would select Last, Sunday,
October and the last field depends on your time zone. In Germany
for instance, you would select 2:00 because Germany's time zone
is one hour ahead of GMT or UTC (GMT+1).
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.

Management Host

The feature limits the hosts which can manage the Switch. That is, any hosts can manage
the Switch via telnet or web browser. If user has configured one or more management
host, the Switch can be managed by these hosts only. The feature allow user to configure
management IP up to 3 entries.
Default Settings
The default is none, any host can manage the Switch via telnet or web browser.
CLI Configuration
© Copyright 2016 TRENDnet. All Rights Reserved.
Node Command
enable show interface eth0
eth0 show
eth0 management host
A.B.C.D
eth0 no management host
A.B.C.D
Example:
TI-PG1284I#configure terminal
TI-PG1284I(config)#interface eth0
TI-PG1284I(config-if)#management host 192.168.200.106
Web Configuration
Basic Settings > General Settings > Management Host
Parameter Description
Management
This field configures the management host.
Host
TI-PG1284i
Description
The command displays the all of the interface
eth0 configurations.
The command displays the all of the interface
eth0 configurations.
The command adds a management host address.
The command deletes a management host
address.
21