TRENDnet TI-PG1284i User Manual page 149

TRENDnet User's Guide
acl no source interface
PORT_ID
Where the MAC mask allows users to filter a range of MAC in the packets' source MAC or
destination MAC.
For example:
source mac 00:01:02:03:04:05 ff:ff:ff:ff:00
 The command will filter source MAC range from 00:01:02:03:00:00 to
00:01:02:03:ff:ff
Where the IPMASK mask allows users to filter a range of IP in the packets' source IP or
destination IP.
For example:
source ip 172.20.1.1 255.255.0.0
 The command will filter source IP range from 172.20.0.0 to 172.20.255.255
Example:
TI-PG1284I#configure terminal
TI-PG1284I(config)#access-list 111
TI-PG1284I(config-acl)#vlan 2
TI-PG1284I(config-acl)#source interface 1
TI-PG1284I(config-acl)#show
Profile Name: 111
Activate: disabled
VLAN: 2
Source Interface: 1
Destination MAC Address: any
Source MAC Address: any
Ethernet Type: any
Source IP Address: any
© Copyright 2016 TRENDnet. All Rights Reserved.
This command removes the source interface
from the profile.
Destination IP Address: any
Source Application: any
Destination Application: any
Note: Any: Don't care.
Web Configuration
Security > Access Control List
Parameter Description
IP Type Selects IPv4 / IPv6 type for the profile.
Profile Name The access control profile name.
Action Selects Disables / Drop / Permits / DSCP action for the profile.
Configures the Ethernet type of the packets that you want to
Ethernet Type
filter.
VLAN Configures the VLAN of the packets that you want to filter.
Source MAC Configures the source MAC of the packets that you want to filter.
TI-PG1284i
146