TRENDnet TI-PG1284i User Manual page 77

TRENDnet User's Guide
if-range vlan-stacking port-based
spvid <1~4096>
if-range vlan-stacking tunnel-tpid
index <1-6>
Web Configuration
VLAN Stacking
Advanced Settings > VLAN > Q-in-Q > VLAN Stacking
Parameter Description
Select one of the three modes, Disable or Port-Based or Selective
Action
for the VLAN stacking.
Configures the TPID Table: The TPID table has 6 entries.
© Copyright 2016 TRENDnet. All Rights Reserved.
This command sets the service
provider's VID of the specified port.
This command sets TPID for a Q-in-Q
tunnel port.
Tunnel TPID Index Selects the table index.
TPID Configures the TPID.
Configures the Port TPID:
Port Selects a port or a range of ports which you want to configure.
Tunnel TPID Index Configures the index of the TPID Table for the specific ports.
TI-PG1284i
74