TRENDnet TI-PG1284i User Manual page 47

TRENDnet User's Guide
Web Configuration
General Settings
Advanced Settings > IGMP Snooping > IGMP Snooping > General Settings
Parameter Description
Select Enable to activate IGMP Snooping to forward group
IGMP Snooping
multicast traffic only to ports that are members of that group.
State
Select Disable to deactivate the feature.
Report Suppression Select Enable/Disable to activate/deactivate IGMP Snooping
State report suppression function.
Select Add and enter VLANs upon which the Switch is to
IGMP Snooping
perform IGMP snooping. The valid range of VLAN IDs is
VLAN State
between 1 and 4094. Use a comma (,) or hyphen (-) to specify
© Copyright 2016 TRENDnet. All Rights Reserved.
more than one VLANs. Select Delete and enter VLANs on which
to have the Switch not perform IGMP snooping.
Specify the action to perform when the Switch receives an
Unknown Multicast
unknown multicast frame. Select Drop to discard the frame(s).
Packets
Select Flooding to send the frame(s) to all ports.
Apply Click Apply to configure the settings.
Refresh Click this to reset the fields to the last setting.
IGMP Snooping This field displays whether IGMP snooping is globally enabled
State or disabled.
Report Suppression This field displays whether IGMP snooping report suppression
State is enabled or disabled.
This field displays VLANs on which the Switch is to perform
IGMP Snooping
IGMP snooping. None displays if you have not enabled IGMP
VLAN State
snooping on any port yet.
Unknown Multicast
This field displays whether the Switch is set to discard or flood
unknown multicast packets.
Packets
TI-PG1284i
44