TRENDnet TI-PG1284i User Manual page 50

TRENDnet User's Guide
interface igmp-snooping filtering
profile STRING
interface no igmp-snooping
filtering profile STRINGS
configure interface range
gigabitethernet1/0/
PORTLISTS
if-config igmp-snooping filtering
profile STRING
if-config no igmp-snooping
filtering profile STRINGS
Web Configuration
General Settings
Advanced Settings > IGMP Snooping > IGMP Snooping > General Settings
© Copyright 2016 TRENDnet. All Rights Reserved.
This command enables the IGMP
snooping filtering profiles on the specific
port.
This command disables the IGMP
snooping filtering profiles on the specific
port.
This command enters the interface
configure node.
This command enables the IGMP
snooping filtering profiles on the range of
ports.
This command disables the IGMP
snooping filtering profiles on the range of
ports.
Parameter Description
IGMP Filtering
This field configures the global IGMP Filtering state.
State
Profile
This field creates the IGMP Filtering profile.
Type
The field configures the type of action for the profile.
Apply Click Apply to apply the settings.
Refresh Click this to reset the fields to the last setting.
IGMP Filtering Status
The profile name.
Profile
Type The type of action.
The field indicates the ports that the IGMP Filtering profile is
Ports
activated.
Action Click the "Delete" button to delete the profile.
TI-PG1284i
47