TRENDnet TI-PG1284i User Manual page 57

TRENDnet User's Guide
CLI Configuration
Node Command
enable show mvr
enable show mvr vlan VLANID
enable show igmp-snooping
configure mvr VLANID
configure no mvr VLANID
MVR group NAME
MVR no group NAME
MVR inactive
MVR no inactive
MVR mode
(dynamic|compatible)
MVR name STRING
MVR no name
© Copyright 2016 TRENDnet. All Rights Reserved.
Description
This command displays the current MVR
configurations.
This command displays the current MVR
configurations of the specific VLAN.
This command displays the current IGMP
snooping configurations.
This command configures the MVR
configurations for the specific VLAN.
This command disables the MVR
configurations for the specific VLAN.
This command configures a group
configuration for the MVR.
This command removes the group
configurations from the MVR.
This command disables the MVR settings.
This command enables the MVR settings.
This command configures the mode for the
MVR.

Dynamic : Sends IGMP report to all
MVR source ports in the multicast
VLAN.

Compatible : Sets the Switch not to
send IGMP report.
This command configures the name for the
MVR.
This command configures the default name
for the MVR.
MVR receiver-port PORTLIST
MVR no receiver-port
PORTLIST
MVR source-port PORTLIST
MVR no source-port
PORTLIST
MVR tagged PORTLIST
MVR no tagged PORTLIST
MVR priority-override
(disable|enable)
TI-PG1284i
This command sets the receiver port(s).
Normally the source ports are connected to
the streaming client.
This command removes a port or range of
ports from the receiver port(s).
This command sets the source port(s).
Normally the source ports are connected to
the streaming server.
This command removes a port or range of
ports from the source port(s).
This command sets the tagged port(s). Same
as the VLAN tagged port.
This command removes a port or range of
ports from the tagged port(s).
This command enables/disables the
multicast priority override.
54