TRENDnet TI-PG1284i User Manual page 134

TRENDnet User's Guide
Edge Port Configures the port type for the specific port. Edge or Non-Edge.
BPDU Filter Enables/Disables the BPDU filter function for the specific port.
BPDU Guard Enables/Disables the BPDU guard function for the specific port.
Enables/Disables the BPDU root guard function for the specific
ROOT Guard
port.
Port Status
Active The state of the STP function.
The port role. Should be one of the Alternated / Designated / Root
Role
/ Backup / None.
The port's status. Should be one of the Discarding / Blocking /
Status
Listening / Learning / Forwarding / Disabled.
Path Cost The port's path cost.
Priority The port's priority.
Edge Port The state of the edge function.
BPDU Filter The state of the BPDU filters function.
BPDU Guard The state of the BPDU guards function.
ROOT Guard The state of the BPDU Root guard function.
© Copyright 2016 TRENDnet. All Rights Reserved.
STP Status
Advanced Settings > STP > STP Status
Parameter Description
Current Root Status
Instance The Instance ID.
MAC address This is the MAC address of the root bridge.
Root refers to the base of the spanning tree (the root bridge). This
Priority field displays the root bridge's priority. This Switch may also be the
root bridge.
Root Cost This is the path cost to the root bridge.
This is the maximum time (in seconds) the Switch can wait without
MAX Age receiving a configuration message before attempting to
reconfigure.
This is the time interval (in seconds) at which the root switch
Hello Time transmits a configuration message. The root bridge determines
Hello Time, Max Age and Forwarding Delay.
This is the time (in seconds) the root switch will wait before
Forward Delay
changing states.
Root Port This is the port to the root bridge.
TI-PG1284i
131