TRENDnet TI-PG1284i User Manual page 74

TRENDnet User's Guide
TI-PG1284I(config-vlan)# tagged 8
TI-PG1284I(config-vlan)# exit
TI-PG1284I(config)# vlan 20
TI-PG1284I(config-vlan)# fixed 1,2
TI-PG1284I(config-vlan)# tagged 1
TI-PG1284I(config-vlan)# exit
TI-PG1284I(config)# vlan 200
TI-PG1284I(config-vlan)# fixed 1,2
TI-PG1284I(config-vlan)# tagged 2
TI-PG1284I(config-vlan)# exit
TI-PG1284I(config)# interface gigaethernet1/0/1
TI-PG1284I(config-if)# vlan-stacking port-based role access
TI-PG1284I(config-if)# vlan-stacking spvid 200
TI-PG1284I(config-if)# vlan-stacking priority 3
TI-PG1284I(config)# interface gigaethernet1/0/2
TI-PG1284I(config-if)# vlan-stacking port-based role tunnel
TI-PG1284I(config-if)# vlan-stacking tunnel-tpid index 2
TI-PG1284I(config)# interface gigaethernet1/0/7
TI-PG1284I(config-if)# vlan-stacking port-based role access
TI-PG1284I(config-if)# vlan-stacking spvid 100
TI-PG1284I(config-if)# vlan-stacking priority 4
TI-PG1284I(config)# interface gigaethernet1/0/8
TI-PG1284I(config-if)# vlan-stacking port-based role tunnel
TI-PG1284I(config-if)# vlan-stacking tunnel-tpid index 2
TI-PG1284I(config-if)# exite
TI-PG1284I(config)# exit
TI-PG1284I# show vlan-stacking
TI-PG1284I# show vlan-stacking tpid-table
TI-PG1284I# show vlan-stacking portbased-qinq
Selective Q-in-Q
© Copyright 2016 TRENDnet. All Rights Reserved.
The traffic based Q-in-Q is also called Selective Q-in-Q. Selective Q-in-Q allows the Switch
to add different outer VLAN tags to the incoming frames received on one port according
to their inner VLAN tags. In the Selective Q-in-Q mode, switch performs traffic
classification for the traffic incoming to a port based on the VLAN ID. When a user uses
different VLAN IDs for different services, traffic can be classified according to the VLAN
ID. For example, the VLAN ID 20 for surfing on the internet by PC, VLAN ID 30 for IPTV and
VLAN ID 40 for VIP customers. After receiving user data, the switch labels the traffic of
surfing on the Internet by PC with 500 as a SPVID outer tag, IPTV with 600, and VIP
customers with 700.
This following example shows how to configure ports 3 on the Switch to tag incoming
frames with the different service provider's VID and priority.
TI-PG1284I(config)# vlan-stacking selective
TI-PG1284I(config)# vlan-stacking tpid-table index 6 value 9100
TI-PG1284I(config)# vlan 20
TI-PG1284I(config-vlan)# fixed 3,4
TI-PG1284I(config-vlan)# tagged 3
TI-PG1284I(config-vlan)# exit
TI-PG1284I(config)# vlan 30
TI-PG1284I(config-vlan)# fixed 3,4
TI-PG1284i
71