Table of Contents
Advertisement
TRENDnet User's Guide
Reset the factory default settings of the Switch
Press the Reset button to set the settings to factory default configuration.
The configuration status
Display the configuration status of recorded in the NV-RAM.
Notice:
If the user has changed any configurations, the message displays "The configurations have
been modified!" Otherwise, the message "The configurations are default values."
There are two conditions will change message from "The configurations have been
modified!" to "The configurations are default values."
1.
Click "Reset configuration" in web management or do cli command, reload
default-config.
2.
Click "Upload configuration" in web management or do cli command,
"archive download-config xxx".
© Copyright 2016 TRENDnet. All Rights Reserved.
Firmware
Management > Maintenance > Firmware
Type the path and file name of the firmware file you wish to upload to the Switch in the
File path text box or click Browse to locate it. Click Upgrade to load the new firmware.
Reboot
Management > Maintenance > Reboot
Reboot allows you to restart the Switch without physically turning the power off.
Follow the steps below to reboot the Switch.
In the Reboot screen, click the Reboot button. The following screen displays.
TI-PG1284i
174
Hide quick links:
Advertisement
Table of Contents
