TRENDnet TI-PG1284i User Manual page 110

TRENDnet User's Guide
CLI Configuration
Node
Enable show ptp information
Enable show ptp domain <Domain-ID>
Enable show ptp port <Domain-ID> <Port-ID>
configure ptp enable
configure no ptp enable
configure ptp primary-domain <Domain-ID>
configure no ptp primary-domain
configure ptp domain <Domain-ID>
© Copyright 2016 TRENDnet. All Rights Reserved.
Command Description
This command
displays PTP global
configurations, PTP
domain
configurations and
PTP port
configurations.
This command
displays specified
PTP domain
configurations.
This command
displays specified
PTP domain and
port configurations.
This command
enables PTP.
This command
disables PTP.
This command
configures a
specified Domain ID
as the PTP's primary
domain.
This command
resets the primary
domain ID default
domain ID (0).
This command
creates a specified
domain in PTP.
configure no ptp domain <Domain-ID>
ptp_config domain enable
ptp_config no domain enable
ptp_config clock-mode
<ordinary|boundary|transparent|forward>
ptp_config no clock-mode
ptp_config clock-priority1 <Value>
ptp_config no clock-priority1
ptp_config clock-priority2 <Value>
TI-PG1284i
This command
deletes a specified
domain ID from
PTP.
This command
enables the PTP
domain.
This command
disables PTP
domain.
This command
assigns specified
clock mode in PTP
domain.
This command
deletes existing
clock mode of PTP
domain and assigns
default clock mode
(Forward) in PTP
domain.
This command
assigns specified
priority for PTP
st
domain dataset's 1
priority.
This command
st
deletes existing 1
priority from PTP
domain clock and
assigns default
priority value (128).
This command
assigns specified
107