TRENDnet TI-PG1284i User Manual page 111

TRENDnet User's Guide
ptp_config no clock-priority2
ptp_config path-trace
ptp_config no path-trace
ptp_config slave
ptp_config no slave
ptp_config two-step-clk
ptp_config no two-step-clk
© Copyright 2016 TRENDnet. All Rights Reserved.
priority for PTP
domain dataset's
nd
2 priority.
This command ptp_config
nd
deletes existing 2
priority from PTP
domain clock and
assigns default
ptp_config
priority value (128).
This command
enables path trace
TLV and adds TLV in
ptp_config
list.
This command
disables path trace
ptp_config
TLV in domain and
deletes it from list.
This command
enables PTP domain
ptp_config_port
as slave. PTP
domain will be act
as member in PTP
network.
ptp_config_port
This command
disables PTP domain
as slave only. Based
ptp_config_port
on clock data sets it
can be act as either
slave or master.
This command
ptp_config_port
enables two step
clock mode in PTP
domain.
This command
disables two step
exit
end
port <Port-ID>
no port <Port-ID>
port enable
no port enable
acceptable-master enable
no acceptable-master enable
TI-PG1284i
clock mode and acts
as one step clock as
default.
This command
provides command
prompt one step as
"config" node.
This command
provides command
prompt as "enable"
node.
This command
creates port data
sets in PTP domain.
This command
deletes port data
sets from PTP
domain.
This command
enables PTP port in
domain.
This command
disables PTP port in
domain.
This command
enables PTP port in
domain as
acceptable master.
This command
deletes PTP port in
domain from
acceptable master
list.
108