TRENDnet TI-PG1284i User Manual page 116

TRENDnet User's Guide
Web Configuration
Advanced Settings > PTP > General Settings
Parameter Description
PTP State Enables / Disables the global PTP state.
Domain ID Creates / Removes a Domain.
Primary Domain Configure the primary domain.
PTP Status
PTP Status The current global PTP state.
PTP Primary Domain The primary domain.
Domain ID The domain ID.
Domain Status The current state of the domain.
Slave The current slave mode of the domain.
Path Trace The current path track mode of the domain.
Clock The current clock mode of the domain.
Two Step Clock The current Two Step clock mode of the domain.
Clock Priority_1 The priority of the clock 1
Clock Priority_2 The priority of the clock priority2 of the domain.
© Copyright 2016 TRENDnet. All Rights Reserved.
st
priority of the domain.
Acceptable Master The priority of the acceptable master of the domain.
Priority
Domain Settings
Advanced Settings > PTP > Domain Settings
Parameter Description
Domain ID Selects a domain ID to configure.
Domain Enables / Disables the domain.
Enable - enables path trace TLV and adds TLV in list.
Path Trace
Disable - disables path trace TLV in domain and delete it from
list.
Enable - enables PTP domain as slave. PTP domain will be act as
member in PTP network.
Slave
Disable - disables PTP domain as slave only. Based on clock
data sets it can be act as either slave or master.
Two Step Clock Enable –enables two step clock mode in PTP domain.
TI-PG1284i
113